Nonlinear vibration effects on the fatigue life of fluid-conveying pipes composed of axially functionally graded materials

Nonlinear Dynamics - Fatigue is inevitable in pipes conveying fluid due to unwanted vibration. Internal resonance occurs in such pipes due to pre-pressure. For the first time, the effects of...     

Ti0.33WO3电子结构和太阳辐射屏蔽性能第一性原理研究

节能减排已成为当今社会发展的主题,对节约能源、提高太阳能的高效综合利用的新型窗用透明隔热材料的理论设计和研究尤其重要.本文采用基于密度泛函理论的计算方法,研究了六方相三氧化钨Ti掺杂前、后的晶格参数、电子能带结构、形成能和光学性质.研究结果表明,Ti掺杂后晶格体积增大,系统能量降为负值,体系具有更好的稳定性;掺杂后电子能带结构发生很大的变化,但材料仍保持n型电导率;随之,其光学性质也发生改变,掺杂前h-WO3无近红外吸收性能,掺杂后的Ti0.33WO3具有很强的近红外吸收性能.在此基础上研究了Ti掺杂h-WO3前、后的太阳辐射屏蔽性能,掺杂前无太阳辐射屏蔽性能;掺杂后的Ti0.33WO3薄膜具有可见光高透明、近红外屏蔽的性能.计算结果为Ti掺杂h-WO3在窗用透明隔热材料方面的研究提供了理论依据.     

Bogdanov-Takens Bifurcation in a Host-parasitoid Model

In this paper, we study a host-parasitoid model with Holling II Functional response, where we focus on a special case: the carrying capacity K2 for parasitoids is equal to a critical value r 1η. It is shown that the model can undergo Bogdanov-Takens bifurcation. The approximate expressions for saddle-node, Homoclinic and Hopf bifurcation curves are calculated. Numerical simulations, including bifurcation diagrams and corresponding phase portraits, are also given to illustrate the theoretical results.     

Theoretical investigation of the crystallographic structure,anisotropic elastic response,and electronic properties of the major borides in Ni-based superalloys

ABSTRACT

In Ni-based superalloys, it is usually found that borides can strengthen the grain boundaries, thereby resulting in an increase in mechanical strength and high-temperature creep properties. Due to their importance and prevalence in Ni-based superalloys, this study employs first-principles methods to investigate the crystallographic structure, anisotropic elastic response, and electronic properties of the major borides, such as M₂B, M₅B₃ and M₃B₂ (M: Cr, Mo, W), respectively, which is necessary for the assessment of complex mechanical responses of Ni-based superalloys. The results demonstrate that the studied borides are all thermodynamically and mechanically stable. Among the M _x B _y binary borides analysed, Cr _x B _y exhibits the largest shear modulus, Young’s modulus, and Vicker hardness values, and these properties increase with the increase of B contents. The studied borides display nearly isotropic elastic properties except for W₅B₃ and W₃B₂. The electronic structure analysis of M _x B _y shows that the strong hybridisation between M-d and B-p orbitals leads to these borides exhibiting higher theoretical hardness, and the overlapping peaks of M-d and B-p orbitals move to a lower energy area with the increase of B contents, which leads to the increase of shear and Young’s moduli of M _x B _y . Furthermore, for M₃B₂ borides, the Cr-B bonds and Cr–Cr bonds are much stronger than the W-B & Mo-B bonds, and W-W & Mo-Mo bonds, respectively, which leads to Cr _x B _y yielding the largest values of elastic moduli.     

Proton conductivity study on three CS/IL@fle-MOF membranes

The low-cost, high specific surface area and porosity, controlled pore size, and chemical properties of metal–organic framework (MOF) materials have attracted much attention in the exploration of proton conduction. The method of chemically modifying MOF structures or introducing conductive medium into the holes can effectively improve the proton conductivities of the materials. Here, the structural tunability of ionic liquid (IL) and flexible MOF (fle-MOF) materials are matched to give full play to the conductivity of IL, the framework support, and the microporous effect of MOFs, which achieves the synergistic effect of performance and expands the temperature range of proton transfer. Three kinds of CS/IL@fle-MOF membranes were prepared by combining three fle-MOFs with 1-carboxymethyl-3-methylimidazole (CMMIM) in different proportions to obtain 15 pieces of membranes. The comparative analyses show that CS/IL@fle-MOF membranes have excellent proton conduction performance at a wider temperature range (263–353 K) and lower relative humidity (75% RH). Among them, the proton conductivities of CS/CMMIM@MIL-88A-25% and CS/CMMIM@MIL-88B-125% are up to 1.33 and 1.42 S cm⁻¹ at 75% RH and 353 K, respectively; whereas those of CS/CMMIM@MIL-53(Fe)-75% and CS/CMMIM@MIL-88B-125% reach up to 2.1 × 10⁻³ and 1.28 × 10⁻³ S cm⁻¹ at 75% RH and 263 K, respectively. The E_a of CS/CMMIM@fle-MOFs is in the range of 0.1–0.5 eV, suggesting that the proton transport follows predominantly the typical Grotthuss transfer mechanism. The results of this study indicate that the CS/CMMIM@fle-MOF membranes combinations offer great potential for the design of composite porous proton-conducting materials.     

Comparative absorption kinetics of seven active ingredients of Eucommia ulmoides extracts by intestinal in situ circulatory perfusion in normal and spontaneous hypertensive rats

Eucommia ulmoides Oliv. (E. ulmoides) is a valuable and nourishing medicinal herb in China that has been used in the treatment of hypertension. Given the fact that most traditional Chinese medicine is mainly used to treat disease, investigating the pharmacokinetics of traditional Chinese medicines in the pathological state is more useful than that in the normal state. However, the differences in the absorption kinetics of active ingredients of E. ulmoides extract between pathological and physiological conditions have not been reported. Therefore, in this study, the rat intestinal in situ circulatory perfusion model was used to investigate the differences in absorption kinetics of seven active ingredients of E. ulmoides extract in normal and spontaneously hypertensive rats, namely, genipinic acid, protocatechuic acid, neochlorogenic acid, chlorogenic acid, cryptochlorogenic acid, (+)-pinoresinol di-O-β-D -glucopyranoside and (+)-pinoresinol 4′-O-β-D -glucopyranoside. Our results indicate that the pathological state of spontaneous hypertension may change the absorption of active components of E. ulmoides extracts, and these findings may provide a reference for improving the rational use of E. ulmoides in the clinic.     

Robust fixed-time attitude stabilization control of flexible spacecraft with actuator uncertainty

Nonlinear Dynamics - A robust fixed-time control framework is presented to stabilize flexible spacecraft’s attitude system with external disturbance, uncertain parameters of inertia, and...     

改变激发环境调控Ho3+离子的上转换发光特性

稀土掺杂上转换发光材料的发光特性不仅依赖于基质材料本身,而且与其激发条件密切相关.本文主要是以Ho^3+离子为研究对象,在NaYF4和LiYF4这两种不同的基质中,研究其在不同激发条件下的上转换发光特性.通过共聚焦显微光谱测试系统,对比Ho^3+离子在NaYF4和LiYF4微米晶体中的发光特性.实验结果发现:Ho^3+离子在这两种不同基质中均展现出较强的荧光发射.然而,当激发功率增加时,在单颗粒个LiYF4微米晶体中,当激发功率增加时,Ho^3+离子则发射出较强绿光及微弱的红光,红绿比变化并不明显,其蓝光发射强度也相对较弱.当激发这两种微米粉末晶体时,结果发现:Ho^3+离子均发射较强的绿光发射并伴有微弱红光发射,两种晶体中的发射特性极其相似.由此可见,在常规测试条件下,一些特殊发光现象是很难被观测到的.同时,通过对其光谱特性的分析,对Ho^3+离子的发光机理进行了研究.     

Organic–Inorganic Hybrid Zinc Phosphate with 28‐Ring Channels

An organic–inorganic hybrid zinc phosphate with 28‐ring channels was synthesized by use of an organic ligand instead of organic amine template under a hydro(solvo)thermal condition. This crystalline zinc phosphate contains large channels constructed from 28 zinc and phosphate tetrahedral units. The walls of the channels consist of two types of zincophosphate chains, in which the Zn atoms are coordinated by 2,4,5‐tri(4‐pyridyl)‐imidazole ligands as pendent groups. This compound exhibits yellow emission and interesting properties of removing cobalt, cadmium, and mercury cations from aqueous solution. A new two‐dimensional organic–inorganic hybrid zincophosphate was also obtained by changing the solvent mixture ratios in the synthesis.